Small Essential Oil Diffuser

(1 review) Write a Review
6.00 (in)
6.00 (in)
6.00 (in)
Current Stock:

A smaller version of our popular Essential Oil Diffuser. Approx. 6" x 6" x 5"

All of our diffusers are custom made. The pictures above are examples of what we can do. When ordering please select the color range of the diffuser vessel above. We will email you pictures of what we currently have available, or allow 2 weeks for us to custom make your order. If you have a different color combination in mind, simply mention it in the notes of your order & we would be happy to make something special just for you!

Our Essential Oil Diffusers are handmade from fine stoneware & beautiful artisan glazes. The hand-forged and patinated copper lotus flower create an artistic and natural integration of the diffusing technology. Due to the nature of the glazes and patina process, each diffuser and lotus flower is completely unique and will differ slightly from the images above.

Our Essential Oil Diffusers use the latest in ultrasonic technology to break up the blending of essential oils and water into mist of micro-particles and disperse them into the air. This type of diffusion creates a therapeutic mist that helps to humidify the air and features the gentle sound of trickling water. Allowing you to benefit from the aromatherapy of the essential oils, and the ionizing and humidifying effect of the water vapor in your home or spa.  This diffusion method doesn't utilize heat, which maintains essential oil integrity and holistic properties.

How it works:

An ultrasonic diffuser utilizes electronic frequencies to cause a small disk under the surface of the water to vibrate at a very fast rate. These ultrasonic vibrations break the essential oil into tiny micro-particles, dispersing the oil in a fine mist.  These tiny particles are more easily absorbed by the lungs for a greater therapeutic effect on the body, mind, and spirit. No heating or burning means the properties of the oil are not broken down.

Instructions for setup and optimal usage:

  1.  Place the silver mist unit in the center of the stoneware vessel & thread the cord through the hole.  Push the black plug firmly into the hole.
  2.  Fill with bottled /filtered drinking water so that the water level is just above the top of the water level sensor (black bar) on the mist unit.
  3.  Connect the mist unit to the transformer and plug the transformer into the main power supply.
  4.  Place the copper lotus flower on top of the stoneware vessel.  (Use caution as points of flower may be sharp.) Adjust placement and lotus leaves for optimal mist without splashing.
  5.  Add a couple (less, more often is better than a lot all at once) drops of your favorite essential oil and enjoy!

               -  The diffuser sends out small jets of water while in operation. Do not place the unit where water spillage or condensation will cause damage to furniture, electric products, floors, or anything else that may be affected by water damage. 

               -  Use bottled/filtered drinking water water. Hard water or water with a lot of minerals will clog the diffuser. Periodically change water to keep clean. When water becomes dirty, replace with clean water. Dirty water will affect the performance of the diffuser. DISTILLED WATER WILL KILL THE NEBULIZER.     

              -  Suggested usage of diffuser motor is no more than 8 hours a day. Unplugging the unit when not in use(separating the cord at the junction works too) will increase the life of the nebulizer. Letting the diffuser run out of water repeatedly will shorten the life of your nebulizer.

               -  After operation the mist unit for some time, you may notice a decrease in the amount of mist produced or it may stop working altogether. At that time, you should either clean or replace the ceramic disc. We also offer replacement nebulizers at wholesale cost.


If you want to reduce the mist/splash from your diffuser use the small copper disc as shown below. If you do not have one send us an email & we will mail you one free of charge.



¨      Always unplug the outlet before cleaning or handling.

¨      Disconnect, dry and store the unit in a dry place if not in use for extended period of time.

¨      Do not lift, carry or pull the unit by the power cords.

¨      Do not exceed the maximum voltage and wattage on transformer.


  • 5
    Great product and customer service.

    Posted by Ruby Burrows on 28th Jan 2016

    The product was a gift. The person who received it was excited about the unique design..

    I was impressed by the customer service I received in ordering it. Hope to see you back in Tucson.